Back to 4x Serial to Ethernet Terminal Evaluation Kit Ordering Page The TEV-LBx boards carry display panels. Three boards are currently supplied by Tibbo: - TEV-LB0 : carries 128x64, black/white WINSTAR WG12864F LCD panel (SAMSUNG S6B0108 controller).
- TEV-LB1 : carries 128x96, 4-bit RITDISPLAY RGS13128096 OLED panel (SOLOMON SSD1329 controller).
- TEV-LB2 : carries 176x220 AMPIRE AM176220 TFT panel (HIMAX HX8309 controller).
You can choose what display board will be installed on your EM1000-TEV. TEV-LBx Board ConnectorThe TEV-LBx boards are connected to the TEV-MB0 motherboard through a 2x20-pin connector. Each two pins of the connector are combined together for better electrical contact. Therefore, the connector effectively has 20 lines. | Pin # | Function | | 1 | VIN (12V) | | 2 | 5V | | 3 | 3.3V | | 4 | GND | | 5 | GPIO48* | | 6 | GPIO47* | | 7 | GPIO46* | | 8 | GPIO39/P4.7* | | 9 | GPIO38/P4.6* | | 10 | GPIO37/P4.5* | | 11 | GPIO36/P4.4* | | 12 | GPIO35/P4.3* | | 13 | GPIO34/P4.2* | | 14 | GPIO33/P4.1* | | 15 | GPIO32/P4.0* | | 16 | GPIO44* | | 17 | GPIO43* | | 18 | GPIO42* | | 19 | GPIO41* | | 20 | GPIO40* | * I/O pins of the EM1000 moduleBack to 4x Serial to Ethernet Terminal Evaluation Kit Ordering Page
|
